Category Archives: Water-Online

  • Home
  • Archive by category Water-Online

CONDUCTIVITY / SALINITY

APPLICATIONS Urban waste water treatment Industrial effluent treatment Surface Water monitoring Sea Water Drinking Water   MOUNTING AT 4 ELECTRODES The electrode works with a technology in 4 electrodes an alternating current of constant-voltage is established between a primary’s pair of electrodes in graphite. The secondary’s electrodes in platinum allow of regulate the voltage imposed […]

Read more

OPTOD : OPTICAL DISSOLVED OXYGEN

  APPLICATIONS Urban waste water treatment Industrial effluent treatment Surface Water monitoring Sea Water monitoring, fish farming, aquarium Drinking Water   OPTICAL TECHNOLOGY The OPTOD (Optical Dissolved Oxygen technology) is based on luminescent optical technology. The OPTOD sensor is approved by the ASTM International Method D888-05 Without calibration requirements and thanks to an ultra low […]

Read more

NEPHELOMETRIC TURBIDITY

APPLICATIONS Urban wastewater treatment (inlet/outlet controls) Sanitation network Industrial effluent treatment Surface water monitoring Pumping drinking water DIGITAL TECHNOLOGY The measure principle is based on IR nephelometry / 850 nm. The sensor can be calibrated with a formazine standard solution The NTU sensor integrates a low-cost optical technology, with a very few maintenance and no […]

Read more

PH, ORP & TEMPERATURE

The SE sensor has been designed to perform under hard conditions from pure mountains water with conductivity as low as 20 μS/cm, lakes and rivers (100-2000 μS/cm), seawater with conductivities of 50 mS/cm and to wastewater with conductivity higher than 200 mS/cm This sensor features a “long life” reference, The Plastogel c SE technology increase the lifetime of the probe the […]

Read more

Digital Controller Model: SE4000 Series

APPLICATIONS Urban waste water treatment Industrial effluent treatment Surface Water monitoring Sea Water Drinking Water  MEASURED PARAMETER pH ORP Temperature Redox DO. Conductivity Salinity TDS Turbidity TSS Cl2  CAPABILITY At a time 4 Channel display with Date & Time Touch Screen FTP supported SD card supported for data storage Power on indication Supports Horizontal and […]

Read more

On-line Turbidity Measurement, Model: PTV-1000 with flow Indicator

Power Requirements 90 to 264 VAC, 50/60 Hz. Auto Select Accuracy ± 2 % of reading from 0 to 10 NTU ± 4 % of reading between 10 to 100 NTU Stray Light smaller 0.005 / 5 mNTU Displayed Resolution up to 0.0001 NTU (range dependent) or 5 digits displayed Repeatability / Precision better than […]

Read more