SensoDirect Salt 110 (Set) Highlights High measuring accuracy Light weight Protective casing Large digital display High-quality, battery-operated handheld instrument for the determination of salt. Variable in use and user-friendly in operation Description Different parameters SensoDirect 110 series meters can be used to measure pH, salt and conductivity. Housing The protective armor does not guarantee a […]
Read moreTechnical Data: Optics Grid monochromator with reference beam and beam splitter after exit slit Measurement Concentration, single and multi-wavelength measurement of absorbance and % transmission, kinetics, spectra Wavelength Range 190 – 1100 nm Wavelength Resolution 1 nm Wavelength Accuracy ± 1 nm on all Holmium peaks Wavelength Reproducibility better than 0,5 nm
Read moreDisplay Large LCD display Interfaces Micro-USB External Storage Micro SD card Power Supply Micro-USB 4 batteries (AA) Data Logger Software for monitoring and storage of data Auto – OFF Yes Measuring Principle Optical DO Measuring Range Oxygen 0 – 50 mg/l, saturation 0 – 500 %, temperature -5 to 50 °C, barometer 51 to 112 […]
Read moreSpectrophotometer 330-900 nm complete with power supply unit (100-240V,50-60Hz), two batteries for keeping data and serial cable for connection to a PC (D9M). Technical Specification : Wavelength range : 330 to 900 nm Photometric range : -0.3 to 2.5 Abs Spectral bandwidth : 10 nm Wavelength accuracy : +/-2 nm Wavelength reproducibility : +/- 1 […]
Read morePHOTOMETER 6 IN 1 (Chlorine, Bromine, pH, Cyanuric acid, Alkalinity-M, Calcium Hardness) Optics: LEDs, interference filters (IF) and photo sensor in transparent sample chamber. Depending on the version, up to 3 different interference filters are used. Wavelength Accuracy: ± 1 nm Photometric Accuracy4): 3% FS (T = 20°C – 25°C) Photometric Resolution: 0.01 A […]
Read moreThe MD 100 COD is a dedicated, single parameter, instrument for COD Analysis. No need to purchase a multi-parameter colorimeter or spectrophotometer to get access to this critical waste water testing parameter! The instrument utilizes Lovibond VARIO COD tube test reagents, which are available in three testing ranges. The reagents meet US EPA requirements for […]
Read moreTechnical data o Power supply: 230 V / 50-60 Hz or 115 V / 50-60 Hz (switchable) o Power: 550 W o Dimensions: 248 x 219 x 171 mm o Weight: 3.9 kg o Materials, housing: ABS o Protection grid: PPS o Lid: PC o Block insert: PBT o Heating block: Aluminium o Holes in […]
Read moreThe Lovibond sensor system Oxidirect is a 6 sample system that allows precise measurement of BOD based on manometric principle.Manometric respirometers relate oxygen uptake to the change in pressure caused by oxygen consumption while maintaining a constant volume. Lovibond OxiDirect completer unit with 6 sensor heads and control unit with batteries Inductive stirring unit with […]
Read moreThe compact infrared turbidity meter TB 210 IR is designed to allow fast, precise on-site testing. The unit measures the scattered light at an angle of 90°, as stipulated in EN ISO 7027. The wide measuring range from 0.01-1100 TE/F = NTU = FNU makes the instrument suitable for various applications, ranging from drinking water to waste water. As […]
Read moreSpecifications: Display: Large LCD display with contrast adjustment Measurement pH: 0 to 14.00 pH Conductivity: 200 μS / 2 mS / 20 mS / 200 mS TDS (Total Dissolved Solids): 0 – 132 ppm / 0.1 ppm 132 – 1,320 ppm / 1 ppm 1,320 – 13,200 ppm / 10 ppm 13,200 – 132,000 ppm […]
Read more