SensoDirect Salt 110 (Set) Highlights High measuring accuracy Light weight Protective casing Large digital display High-quality, battery-operated handheld instrument for the determination of salt. Variable in use and user-friendly in operation Description Different parameters SensoDirect 110 series meters can be used to measure pH, salt and conductivity. Housing The protective armor does not guarantee a […]
Read moreParameter: H2S, Cl2, Br2, VOC, NH3, O2, CO, SO2, HCL, CH4 etc……
Read moreDesigned with ‘typhoon technology’ for extreme weather and condensing atmospheres! Falco is the latest generation of fixed VOC detectors that continuously detect a wide range of volatile organic compounds (VOCs) using patented photoionization detection (PID) technology. Unique to this fixed VOC detector is its revolutionary ‘typhoon technology’ safeguarding the PID sensor from condensing moisture for […]
Read moreLSS2004 Laser Backscattering Monitor Measuring Principle The laser beam passes across the stack or duct work and is reflected by the dust particles, the reflected light is then detected by the photoelectric sensor. The intensity of reflected laser signal is proportional to dust concentration, by which the resulting signal is analyzed to yield dust […]
Read moreAPPLICATIONS Urban waste water treatment Industrial effluent treatment Surface Water monitoring Sea Water Drinking Water MOUNTING AT 4 ELECTRODES The electrode works with a technology in 4 electrodes an alternating current of constant-voltage is established between a primary’s pair of electrodes in graphite. The secondary’s electrodes in platinum allow of regulate the voltage imposed […]
Read moreAPPLICATIONS Urban waste water treatment Industrial effluent treatment Surface Water monitoring Sea Water monitoring, fish farming, aquarium Drinking Water OPTICAL TECHNOLOGY The OPTOD (Optical Dissolved Oxygen technology) is based on luminescent optical technology. The OPTOD sensor is approved by the ASTM International Method D888-05 Without calibration requirements and thanks to an ultra low […]
Read moreAPPLICATIONS Urban wastewater treatment (inlet/outlet controls) Sanitation network Industrial effluent treatment Surface water monitoring Pumping drinking water DIGITAL TECHNOLOGY The measure principle is based on IR nephelometry / 850 nm. The sensor can be calibrated with a formazine standard solution The NTU sensor integrates a low-cost optical technology, with a very few maintenance and no […]
Read moreThe SE sensor has been designed to perform under hard conditions from pure mountains water with conductivity as low as 20 μS/cm, lakes and rivers (100-2000 μS/cm), seawater with conductivities of 50 mS/cm and to wastewater with conductivity higher than 200 mS/cm This sensor features a “long life” reference, The Plastogel c SE technology increase the lifetime of the probe the […]
Read moreAPPLICATIONS Urban waste water treatment Industrial effluent treatment Surface Water monitoring Sea Water Drinking Water MEASURED PARAMETER pH ORP Temperature Redox DO. Conductivity Salinity TDS Turbidity TSS Cl2 CAPABILITY At a time 4 Channel display with Date & Time Touch Screen FTP supported SD card supported for data storage Power on indication Supports Horizontal and […]
Read moreTechnical Data: Optics Grid monochromator with reference beam and beam splitter after exit slit Measurement Concentration, single and multi-wavelength measurement of absorbance and % transmission, kinetics, spectra Wavelength Range 190 – 1100 nm Wavelength Resolution 1 nm Wavelength Accuracy ± 1 nm on all Holmium peaks Wavelength Reproducibility better than 0,5 nm
Read more